Advanced Flow Measurement (BANDUNG)

Advanced Flow Measurement (BANDUNG)

TRAINING DESCRIPTION:

Flow is one of four major variables that can be found in industries. As flow has different characteristics compared to pressure, level or temperature, it is necessary to understand behavior, type of flow, selection of sensors and transducers and also type of control valve for control purposes. In many application, it is necessary to determine the magnitude and/or direction of the flow-velocity at a point in the fluid and how this varies from point to point. Sometimes the qualitative information is sufficiently available from direct visual observation. However, most methods also allow quantitative analysis by inserting velocity probes to obtain accurate point measurements. Flow measurement and instrumentation training program will present type of probes, measurement methods, analysis, flow control system and its elements.

TRAINING OBJECTIVES:

After completing this course, you will be able to:

  1. Know the concept of flow measurement
  2. Know the principles of flow measurement
  3. List different methods in flow measurement
  4. Types of flow sensors
  5. Know types of control valves
  6. Know the selection of control valves
  7. Know configuration in flow control systems
  8. Explain basic configuration of flow control

TRAINING METHODOLOGY :
The latest educational methods and strategies will be employed. The course is designed to maximise benefit from the outset. Questions are encouraged throughout, to provide participants with the opportunity to discuss with the presenter and others, specific problems and appropriate solutions. All delegates take away a detailed and comprehensive copy of the materials, and practical excercises using software will be provided to ensure knowledge retention.

TRAINING MATERIAL OUTLINE:

  1. Basic physical properties
  2. Fundamental of measurement
  3. Fundamentals of gas and liquid process measurement
  4. Field instruments and performance
  5. Mechanical flowmeters
  6. Mass flowmeters
  7. Electronics flowmeters
  8. Ultrasonic flowmeters
  9. Design and selection using software
  10. Installation
  11. Flow measurement using Standards
  12. Class and lab work

CLASSROOM/DEMONSTRATION/LABORATORY EXERCISE:

  1. Computer Facilities with Personal Computer Intel Pentium III and 4
  2. Simulation using Software
  3. Process Simulator kit

INSTRUCTOR : Ir.Endra Joelianto, Ph.D. and team

VENUE : Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Amaroossa, Serela, Gino Feruci), Grand Setiabudi, De Java

TRAINING DURATION : 4days

TRAINING TIME :
11 Okt 2021-14 Okt 2021
08 Nop 2021-11 Nop 2021
06 Des 2021-09 Des 2021

INVESTMENT PRICE/PERSON:
1. Rp 8.750.000/person (full fare) or
2. Rp 8.500.000/person (early bird, payment 1 week before training) or
3. Rp 8.250.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flashdisk contain training material
  3. Certificate
  4. NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Foto
  8. Training room with full ac facilities and multimedia
  9. Lunch and twice coffee break everyday of training
  10. Qualified Instructor
  11. Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

TRAINING INSTRUCTOR
Ir.Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia. He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung. He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung. He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012). He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung. He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004). He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB.He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia, PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB, Immanuel Hospital, LIPI-Bandung, LAPI-ITB, PT. Indonesia Power, Total Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc. He has delivered more than 150 professional training programs on Instrumentation and Control. He also serves as instrumentation and control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of Energy and Mineral Resources – Indonesia.