Machinery Condition Monitoring For Predictive And Preventive Maintenance | Informasi Training Pelatihan Workshop

Machinery Condition Monitoring For Predictive And Preventive Maintenance

Machinery Condition Monitoring For Predictive And Preventive Maintenance

Tanggal    
8-10 September 2014
6-8 Oktober 2014
10-12 November 2014
8-10 Desember 2014

Jam Pelaksanaan    
08:00 – 16:00 WIB

Tempat  
Hotel berbintang di Yogyakarta (Ibis Style, Horison Ultima Riss, Grand Zurry, dsb) & kota-kota lain sesuai permintaan peserta (dengan biaya yang berbeda)

Pembicara / Fasilitator    
Victor Malau, PHd dan Team
Trainer, Konsultan dan Assessor dalam Bidang Mecanical)

Harga     
Rp 7.500.000

Materi    
Industrial machinery or power plant is a major supporter of the industry and has a very high critical rate. This means that if there is a sudden damage, the industry will experience huge losses both morally and materially. Therefore, industrial machine that has a high critical level must be monitoring to avoid a sudden damage. Maintenance techniques that can be applied is a preventive maintenance which the main point is a scheduled maintenance and predictive maintenance. By applying predictive maintenance, the symptoms of damage can be detected as early as possible and the cost of treatment can be suppressed.

Objectives
• Participants understand machine condition monitoring techniques
• Participants can choose the engine condition monitoring techniques
• Participants can do the monitoring machine condition

Outline Materi :

  1. Maintenance techniques and strategies
  2. Basic regular maintenance
  3. Basic predictive maintenance
  4. Bathtub curve
  5. Selection of machine condition monitoring techniques
  6. Inspection / monitoring of visual
  7. Use of lubricants
  8. Lubricant contaminants
  9. Inspection / monitoring and analysis of lubricants
  10. Inspection / monitoring and vibration analysis
  11. Vibration spectrum analysis
  12. Inspection and monitoring of geometric
  13. Analysis of leveling, run out and misalignment
  14. Alignment shaft

Wajib diikuti oleh    
• Electrical Engineer/Supervisor
• Instrument Engineer/Supervisor
• Professionals
• Plant Maintenance/Operators/Supervisors/Superintendent
• Technician

Jadwal Lainnya :   Petugas K3 Pemantauan Lingkungan Kerja (BANDUNG)
Pendaftaran Sementara
  1. (required)
  2. (required)
  3. (valid email required)
  4. (required)
  5. (required)
  6. (required)
  7. Mohon tidak memesan tiket perjalanan / akomodasi penginapan sebelum ada kepastian training akan berjalan. Jika ada pertanyaan bisa menghubungi 085102495051 dan 08998121246
  8. Jika Anda mendaftarkan training ini untuk orang lain mohon cantumkan nama dan email di bawah ini
  9. Captcha
 

cforms contact form by delicious:days